Using Video In
Capture full motion or still image video
Your new RADEON™/RADEON™ VE graphics card has Video In (also known
as Composite In) capability for capturing full motion or still image video. Just
attach a video device such as a VCR, camcorder, or laser disk player to the
Video
In
connector on the back of your new graphics card.
Connecting a Video Device
To connect your RADEON™/RADEON™ VE to a video device such as a VCR,
camcorder, or DVD player, attach a composite cable from the
Composite Output
connector on your VCR, camcorder, or DVD player to the
Video In
on your
graphics card. Most video devices such as VCRs, camcorders, and DVD players
have a
Composite Output
, also referred to as an RCA output.
Connecting your video device to the RADEON™ / RADEON™ VE
Video In
1
Turn off your computer and your VCR, camcorder, or DVD player.
2
Ensure your RADEON™/RADEON™ VE card is installed correctly.
3
Locate the
Composite Output
on your VCR, camcorder, or laser disk player.
4
Looking at the back of your computer, locate your RADEON™/RADEON™
VE card. Using a Composite cable, attach one end of the cable to the
Video In
on your graphics card and the other to the
Composite Output
on your video
device.
5
Turn on your computer and your video device.
6
Use the ATI Multimedia Center to capture streaming video or still images.
For further information on video capture, and various capture formats, refer to
the ATI Multimedia Center User’s Guide located in the Online User’s Manual
(online.pdf)
on the ATI Installation CD.
