ATI Technologies Radeon CrossFire, Руководство по установке, Страница: 24 / 40

20 Display Configurations
The following table shows possible display configurations available when
CrossFire™ is
not enabled.
Connection
Type Display
Configuration Comments
Master Card
using DMS-59™
connector and
Interconnect
cable. DFP display DFP - digital flat panel display.
CRT display
using DVI-to-
VGA adapter CRT- cathode ray tube analog display.
Single TMDS link mode supported with
a maximum pixel refresh rate of
166Mhz.
Digital HDTV
display If the HDTV display supports the
connection type, it can be used as a
flat panel display using a DVI-I
connector.
Master Card
using DVI-I
connector DFP display DFP - digital flat panel display.
Digital HDTV
display If the HDTV display supports the
connection type, it can be used as a
flat panel display using a DVI-I
connector.
Analog HDTV If the HDTV display supports the
connection type, it can be used as a
flat panel display using a smart dongle.
CRT display
using DVI-to-
VGA adapter CRT - cathode ray tube analog display.
Slave Card
using TMDS
DVI-I connector Connect interconnect cable from DMS-
59™ connection of Master Card.