ATI Technologies FireGL V7100, Руководство пользователя

Страница: 40 / 51

34 Customer Care
Customer Care
To receive Customer Care, you must register your product with ATI.
Product registration is available online. Please visit
ati.com
and select
Customer Care.
Contact Information
If you require further assistance with your product, the following options
are available:
Online
For product information, drivers, frequently asked questions, and e-mail
support, visit
ati.com and select Customer Care.
Bus Address or
Interupt Conflicts • It is necessary to ensure that the I/O and memory
addresses reserved for the graphics board are not
used by other hardware devices.
• The integrated on-board VGA controller of your
FireGL™ card uses the following addresses (hex):
I/O Address:
Standard VGA I/O: 3B0-3DF
Memory Addresses :
Video RAM: A000-BFFF
Video ROM: C000-C7FF
Note: You cannot change the addresses of your
FireGL™ card. In case of an address conflict, try to
modify the I/O address of the add-on card that causes
the conflict.
• To support the special graphics processor on the
FireGL™ card, the system BIOS should automatically
assign a system interrupt to the slot where the card is
installed. However, there may be problems if your
graphics card does not receive an interrupt or a
system interrupt is used for more than one device. In
case of problems check the system configuration utility
of your operating system for the interrupt assignments.
Problem Possible Solution