ATI Technologies All-in-Wonder X800 PCI Express, Руководство пользователя по установке и настройке

Страница: 23 / 60

Installing Drivers and Software in Windows® 15
CHAPTER 3:
Installing Software
This chapter will guide you through the installation of the drivers and software
associated with your All-in-Wonder® X800 PCI Express® graphics card.
Installing Drivers and Software in
Windows®
You will need to install the All-in-Wonder® X800 PCI Express® drivers and
software in the following cases:
• After you have installed the card in your system.
• After you have reinstalled or upgraded your operating system.
This procedure applies to Windows® XP.
Software Installation Prerequisites
To install or remove the drivers, you must have administrator rights or be
logged on as a user with administrator rights.
Your operating system must be installed and running before you can install
the All-in-Wonder® X800 PCI Express® drivers. You must also have Service
Pack 1 (or higher) for Windows® XP.
Make sure your monitor cable is properly attached before you begin.
Note: The installation dialog will display in English if your operating
system’s language is not supported.
To install ATI drivers and software
1
Start your system. When the Found New Hardware Wizard comes up,
click Cancel . When the System Settings Change window asks you
to restart your computer, click No .