Quick Installation 5
CHAPTER 2:
Installing Hardware
This chapter will guide you through the physical installation of your new
All-in-Wonder® X1800 Series graphics card.
Quick Installation
For experienced users and system administrators, follow these brief
instructions for installing your All-In-Wonder® X1800 card in the shortest
possible time.
Installation Steps
1
Uninstall the drivers and software for your old graphics card.
2
Shut down and disconnect your computer system.
3
Remove any previously installed card.
4
Install your new All-In-Wonder® X1800 card.
5
Reassemble and connect your computer system.
6
Install the All-In-Wonder® X1800 drivers and configuration software
from the ATI Installation CD-ROM by doing one of the following:
• Run through the automatic
ATISETUP
utility; or
•
Start > Run > X:\ATISETUP.EXE
(where
X
is the drive letter
of your CD-ROM drive).
Detailed Installation
The following instructions will take you step by step through the
installation of your new All-In-Wonder® X1800.
L
If you are using a motherboard containing an on-board graphics
solution and do not intend to use it as part of a multiple monitor display,
disable it.
Содержание All-In-Wonder X1800 Series
