ATI Technologies 9600 - Radeon XT 128 MB DDR Video Adapter, Инструкция по установке и настройке

Страница: 27 / 62

Installing the Hardware and Software 21
Selecting the sound card
connector for TV audio input
The sound card connector determines which mixer slider is
controlled by the ATI Multimedia Center’s volume slider.
1
Click the Setup button in the TV Player control panel,
then click the Display tab.
2
Click the Initialization Wizard button, then click the Next
button twice.
3
In the Typical Audio Connections page, check I have
connected the cable to confirm that you have connected
your ALL-IN-WONDER card’s audio output cable to your
sound card’s Line-In connector.
4
Click Next to open the TV Sound Initialization Wizard.
5
Click the audio input that matches the connection between
your ALL-IN-WONDER card and your sound card.
(Line-In is the standard audio input when the
ALL-IN-WONDER card’s audio output cable is connected
to the sound card’s Line-In connector.) If you are not sure
how it is connected, click each source (CD Audio, Line-In,
etc.), and listen for the sound.
6
Click the Next button until you reach the End of
Initialization Wizard page, then click the Finish button.
Ensure that the ALL-IN-WONDER card’s audio
output cable is connected to your sound card’s
Line-In connector.
i