ATI Technologies 3D XPRESSION, Руководство пользователя, Страница: 22 / 40

18 Installing ATI’s Enhanced Drivers
Installing Enhanced Drivers for OS/2
To install ATI’s mach64 enhanced drivers for OS/2 2.1 or
OS/2 Warp, you use the INSTALL program. This program
checks the system for possible conflicts, sets the monitor type,
and installs the mach64 enhanced display driver.
To run the INSTALL Program
1
Start OS/2.
2
Check that OS/2 is using a standard VGA driver and no other
applications are running. For more information, see your OS/2
documentation.
3
Double-click the OS/2 System folder.
4
Double-click the Command Prompts folder.
5
Double-click the OS/2 Full Screen object.
6
Insert ATI’s Installation CD-ROM into your CD-ROM drive.
7
Type D: (If D is not your CD-ROM drive, substitute D with the
correct drive letter).
8
Type CD UTILITY.
9
Type OS2INST.
10
Select Utilities Installation from the Main Menu.
This copies the utilities onto your hard drive.
11
Press ENTER to select the default destination directory.
12
When prompted, let the INSTALL program make changes to
your Autoexec.bat file.
13
Select QUICK SETUP
You need to select QUICK SETUP to specify a monitor.
Proper monitor selection is necessary for correct resolution
and refresh rate operation.
14
Select your monitor from the list.
or
If you do not see your monitor listed, see Custom Monitor
Configuration on page 31.
After you select a monitor, you are ready to copy the enhanced
driver files.
vx_ug.bk : chpt3.fm Page 18 Thursday, June 20, 1996 4:25 PM