ATI Technologies 39-0080, Руководство по обслуживанию

Страница: 15 / 15

Micro Wash / MM Hub Control Faults
Symptom Possible Cause Solution
Micro wash control lid / MM Hub fault Display fault Change control lid.
Keyboard fault Change control lid.
Individual LCD dead Check wiring in connection box.
Check wiring in control box.
Wiring connection fault Check power supply, mains fuse, plug fuse and
output fuse.
Software Crash Un-plug lid; then plug in again.
Stand-alone/Master wash control not Master/slave setting incorrect Check master/slave setting correct.
putting milk meters into wash mode Wiring connection fault Check wiring connections in wash control lid.
Check wiring connections in connections box.
Control address setting incorrect Check control address settings.
Check for duplicate control addresses.
Slave wash control / MM Hub not putting Master/slave setting incorrect Check master/slave setting correct.
milk meters into wash mode Wiring connection fault Check wiring connections in wash control lid.
Check wiring connections in connections box.
Micro M3S / M5 not communicating Check connections to Micro M3S / Micro M5.
Check all milk meter controls communicating.
Wash cycle too long/too short Wash time set too long/too short Change wash time.
Innovation In and Out of Parlour
Milk Meter Fault Finding Scheme
15 | Milk Meter Service Manual | v1.2
©
A
TL
A
g
ricu
ltu
ra
l
Te
ch
n
olog
y
L
imite
d:
F
e
br
u
a
ry
2
0
2
2