ATI Technologies 100-505103 - Firegl V5000 128MB Pcie 2PORT Dvi-i Retail, Руководство пользователя

Страница: 12 / 52

6 Detailed Installation
Detailed Installation
The following instructions will take you step by step through the
installation of your new FireGL
TM
V5000.
1
Turn off the computer, monitor, and other peripheral devices.
2
Unplug the computer’s power cord and disconnect all cables from the
back of your computer.
3
Remove the computer cover.
If necessary, consult your computer’s manual for help in removing
the cover.
4
Unscrew or unfasten and remove any existing graphics card from
your computer.
Note: If your computer has an on-board graphics capability, you may
need to disable it on the motherboard. For more information, see your
computer documentation.
5
Locate the appropriate slot and, if necessary, remove the metal back-
plate cover.
L Consult your system builder or OEM to ensure that your system has an
adequate power supply. A PCI Express™ compatible system has a
specialized 12V graphics card power connector. A 350 watt or greater
power supply is recommended. Consult your computer system manual to
ensure the power supply is designed to accommodate a high-end
graphics card with a peak dissipation above 75 watts.
L WARNING
- Wait approximately 20 seconds after unplugging the
power cord before disconnecting a peripheral or removing a
component from the motherboard to avoid possible damage to the
motherboard.
L
WARNING
- Remember to discharge your body’s static electricity by
touching the power supply or the metal surface of the computer
chassis.