Atheros AR5001, Руководство пользователя

Страница: 34 / 91

DO
N
OT
C
OP
Y
2
Chapter PRELIMINARY
2 - 24 • AR5001 STA User’s Guide Atheros Communications, Inc.
2 - 24 • July 2002 COMPANY CONFIDENTIAL
Table 2-3 provides descriptions for the fields on the Network Configuration
Setting, Advanced tab dialog.
To change the encryption type, take the following steps:
1. From the Network Configuration Settings dialog Advanced tab, use the
Encryption Type drop-down menu to specify the encryption type.
2. Click OK to enable your change.
Table 2-3. Advanced Dialog Field Descriptions
Field Name Description
Wireless Mode Specifies 802.11a, 802.11b, or autoselect operation.
Autoselect allows the use of both 802.11a and 802.11b
modes.
Ad Hoc Mode Specifies a band to establish an ad hoc network if no
matching SSID is found after scanning all available
modes.
802.11a Turbo Enables or disables Atheros turbo mode for 802.11a
radio space. Once enabled, both 802.11a and 802.11a
turbo modes are scanned.
802.11g (Pure g) Enables or disables OFDM at 2.4 GHz in the 802.11b
radio space.
802.11b Range Selects either normal (uses all four 802.11b transmit
rates) or extended range (limits network to 1 or 2 Mbit
range).
Encryption Type Specifies the encryption type:s
■
WEP - use only WEP encryption.
■
AES - only associate with Access Points that can
successfully negotiate AES encryption.
■
Auto - Allow the STA and AP to negotiate the
encryption type.
Scan Mode Specifies passive, or auto scannings (use country code
to select the type of scan, active or passive).
Transmit Power Selects full, half, quarter, eighth, or minimum transmit
power.
QoS Disables or enables the station to cooperate in a
network using Quality of Service.
CAUTION: To successfully transmit data frames, specify a unique key.
NOTE: If AES and ad hoc are both specified, the STA will use WEP.