background image

23

Series 1ZC Communicating Sub-Panel Temperature Controller

Unit Repairs

It is recommended that units requiring service be returned to an authorized service center. Before
a controller is returned for service, please consult the service center nearest you. In many cases,
the problem can be cleared up over the telephone. When the unit needs to be returned, the ser-
vice center will ask for a detailed explanation of problems encountered and a Purchase Order to
cover any charge. This information should also be put in the box with the unit. This should expe-
dite return of the unit to you.

This document is based on information available at the time of its publication. While efforts have
been made to render accuracy to its content, the information contained herein does not purport to
cover all details or variations in hardware, nor to provide for every possible contingency in connec-
tion with the installation and maintenance. Features may be described herein which are not pre-
sent in all hardware. Athena Controls assumes no obligation of notice to holders of this document
with respect to changes subsequently made.

Proprietary information of Athena Controls, Inc. is furnished for customer use only. No other use is
authorized without the written permission of Athena Controls, Inc.

Two-Year Limited Warranty

THIS EQUIPMENT IS WARRANTED TO BE FREE FROM DEFECTS OF MATERIAL AND
WORKMANSHIP. IT IS SOLD SUBJECT TO OUR MUTUAL AGREEMENT THAT THE 
LIABILITY OF THE MANUFACTURER IS TO REPLACE OR REPAIR THIS EQUIPMENT AT
ITS FACTORY, PROVIDED THAT IT IS RETURNED WITH TRANSPORTATION PREPAID
WITHIN TWO (2) YEARS OF ITS PURCHASE.

THE PURCHASER AGREES THAT THE MANUFACTURER ASSUMES NO LIABILITY
UNDER ANY CIRCUMSTANCES FOR CONSEQUENTIAL DAMAGES RESULTING FROM
ITS USE OR FROM IMPROPER HANDLING OR PACKAGING OF SHIPMENTS RETURNED
TO THE FACTORY.

COMPONENTS WHICH WEAR OR WHICH ARE DAMAGED BY MISUSE ARE NOT 
WARRANTED. THESE INCLUDE CONTACT POINTS, FUSES, ELECTROMECHANICAL
RELAYS, AND TRIACS. UNITS WHICH HAVE BEEN MODIFIED BY A CUSTOMER IN ANY
WAY ARE NOT WARRANTED.

Other than those expressly stated herein, THERE ARE NO OTHER WARRANTIES OF ANY
KIND, EXPRESS OR IMPLIED, AND SPECIFICALLY EXCLUDED BUT NOT BY WAY OF 
LIMITATION, ARE THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR 
PURPOSE AND MERCHANTABILITY. 

IT IS UNDERSTOOD AND AGREED THE SELLER’S LIABILITY WHETHER IN CONTRACT,
IN TORT, UNDER ANY WARRANTY, IN NEGLIGENCE OR OTHERWISE SHALL NOT
EXCEED THE RETURN OF THE AMOUNT OF THE PURCHASE PRICE PAID BY THE 
PURCHASER AND UNDER NO CIRCUMSTANCES SHALL SELLER BE LIABLE FOR
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES. THE PRICE STATED
FOR THE EQUIPMENT IS A CONSIDERATION IN LIMITING SELLER’S LIABILITY. NO
ACTION, REGARDLESS OF FORM, ARISING OUT OF THE TRANSACTIONS OF THIS
AGREEMENT MAY BE BROUGHT BY PURCHASER MORE THAN ONE YEAR AFTER THE
CAUSE OF ACTION HAS ACCRUED. 

SELLER’S MAXIMUM LIABILITY SHALL NOT EXCEED AND BUYER’S REMEDY IS 
LIMITED TO EITHER (i) REPAIR OR REPLACEMENT OF THE DEFECTIVE PART OR 
PRODUCT, OR AT SELLER’S OPTION (ii) RETURN OF THE PRODUCT AND REFUND 
OF THE PURCHASE PRICE, AND SUCH REMEDY SHALL BE BUYER’S ENTIRE AND
EXCLUSIVE REMEDY. THE SPECIFICATIONS PUT FORTH IN THIS MANUAL ARE 
SUBJECT TO CHANGE WITHOUT NOTICE.

Warranty/Repairs

Содержание 1ZC Series

























Отзывы: