ATH-Heinl Single Lift 35M, Руководство по эксплуатации

Страница: 70 / 386

® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2020-03
Manufacturer ATH-Heinl GmbH & CO.KG
- 20 -
Assembling the arm together with the support
plates
Fit the arm on the lifting carriage of the
lift. Use the two M16X70 screws (
1
), four M16X60 screws
(
2
) and the
corresponding washers supplied for this purpose as shown
in the adjacent
diagram.
Install all the support arm components on the arm as shown in the adjacent diagram. Ensure that all
components are assembled and the safety equipment works reliably.
No. Description No. Description No. Description
1 Rear support arm 12 M8X12 screw 23 M6X8 screw
2
Left rear support arm
extension
13 Mounting plate 24 Front right extension
3
Left rear support arm
holding fixture
14
Right rear support arm
extension
25 D.25 circlip
4 Arm base plate 15 Support plate 26 M6X12 screw
5
Right rear support arm
holding fixture
16
Support plate holding
fixture
27 M10X20 screw
6 D.12 washer 17 Bolt 28 D.10 washer
7 M12X30 screw 18 Notched plate 29 Plastic sliding part
8 4X16 bolt 19 Support arm release 30 Variable arm extension
9 M8X60 screw 20 Flat-head bushing 31 Front left extension
10 Support arm release 21 Guard bracket
11 Spring 22 D.6 washer
1
2