ATH-Heinl Cross Lift 50, Руководство по эксплуатации

Страница: 85 / 450

® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2020-03
Manufacturer ATH-Heinl GmbH & CO.KG
- 27 -
Wheel-free lift free lift
1. All valves should be closed!
2. Selector switch on wheel-free lift!
3. Open connection on the main cylinder (accelerated hose, Drawing A-2)!
4. Carefully press the lifting button and watch until hydraulic oil comes out of the accelerated hose!
5. As soon as the air has been released from the line and hydraulic oil appears, close the connection!
6. Raise the main scissors from the wheel-free lift and leave in end position
7. Open valve C!
8. Open bleed valve on secondary cylinder!
9. Open connection hose to the main cylinder (opposite side)!
10. Carefully press the lifting button and watch until hydraulic oil comes out of the bleed valve from the
secondary cylinder!
11. As soon as the air has been released from the bleed valve on the secondary cylinder and hydraulic
oil appears, close the connection!
12. Keep carefully pressing the lifting button and watch until hydraulic oil comes out of the connection
hose to the main cylinder (opposite side)!
13. As soon as the air has been released from here as well and hydraulic oil appears, close the connection!
You can start by equating the rails from the free lift via the valve.