ATH-Heinl ATH W82, Руководство пользователя

Страница: 32 / 81

© Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Printing errors and technical changing´s reserved / Version: 02/2017
- 31 -
Utilization
1. Self-diagnostic
After switching on, the device make a self-test and then automatically switches to "Dynamic" mode
2. Mounting of a wheel
Select a suitable cone to centre the wheel on the balancing shaft.
As shown below, there are 2 easy ways to fix the wheel.
a. The first way to mount a wheel is shown in
the picture.
The rim is fixed by using a cone from the
outside of the rim.
When using the largest cone, the spacer ring must
be used additionally.
This possibility increases the risk of
clamping errors and is therefore only
recommended for steel rims.
b. By the second possibility, at first you place
the spring on the shaft. Than you can use
a suitable cone. After positioned the wheel
on this cone you can fix it by help of a
pressure cap on the shaft.