© Copyright by ATH-Heinl GmbH & Co. KG, 2014, All rights reserved. / Subject to misprints and technical changes / Version: 05/2014
9 / 36
Function table
Main function
Suction (recovery)
Sucks the refrigerant from the vehicle system into
the climate station.
Vacuum
This unit evacuates air and moisture from the A/C
system and then automatically performs a vacuum
leak test.
Adding oil
Adding compressor oil into the vehicle A/C system.
Process can be carried out manually or
automatically.
Adding UV Agent
Adding UV
agent
in the A/C system of the vehicle to
locate leaks. Process can be carried out manually or
automatically.
Filling/change
Refrigerant is filled from the A/C station into the A/C
system of the vehicle.
Automatic mode
Functions are performed fully automatically
(automatic process). The A/C station stops
automatically when the process is finished
System settings
Calibration
Calibration of the refrigerant cylinder, of the oil scale
and of the UV medium scale
Language
Language selection
Pressure relief
(refrigerant)
In case of failure of the automatic control the
refrigerant cylinder pressure can be released
manually here.
Unit of measurement
Choice of metric or British measuring units (lb)
Weight input for empty tanks
Enter of the empty weight of the refrigerant cylinder,
of the oil bottles and the UV-bottles.
Diagnosis
Direct control of the internal electronic components,
solenoid valves, compressor, vacuum pump. This is
used to check if a fault occurs.