Wireless P2 Game Controller
The image below shows the location of the switches and buttons. Each function is outlined below.
(The illustration is for reference only. Certain controller functions are incompatible with some games.)
Appearance and Key List
Directional Pad (D-Pad)
Directional Pad for game playing.
Press the button to start the game and press it again to pause.
2
Power Indicator
Press any key and the indicator will light up if there
is still battery power left in the controller.
3
Power
Turn the controller’s power ON/OFF.
4
1
START
A B
C
X
Y
Z
START
1
3
4
2
NOTE:
Button functions may vary
depending on game.
Find out more about Blast!™ at:
https://blast.atgames.net
HOW TO PLAY
TWO-PLAYER GAMES
Press
START
on
your P2 controller
to join the game.
Power on your
Blast! dongle.
Enter any 2-player game
using the P1 controller.
1
3
2
w w w . a t g a m e s . n e t
NOTE :
If a controller button has not been pressed for a while, the controller will enter standby mode.
Press any button to wake the controller from standby.
Each wireless controller requires 2 AAA batteries, not included.
How TO confirm the wireless controller
connects to the BLAST! HDMI dongle
Controllers from previous AtGames' consoles are not supported.
Insert two AAA batteries into
the back of the controller.
1
1
Power on the system. Press any
button on the controller and it
will connect to the HDMI
dongle automatically.
The Power indicator light will
blink. Repeat for the second
controller.
2
3
When the power
indicator stops
blinking, you
have completed
pairing.
6
5
Turn the
controller’s
power on.
Turn the
controller’s
power off.
Plug the large end of the
USB cable into a USB
port or USB AC adapter
(not included) to turn on
the HDMI dongle.
Plug the small end
of the USB cable
into the Micro-USB
port on your HDMI
dongle.
4
NOTE :
If the controller is not working, the batteries may have run out. Please change the batteries.
How To pair the controller with
the BLAST! HDMI dongle
3
1
2
Press and hold Game key
A and press Up on D-pad for
5 seconds until the power
indicator starts blinking
after completing Step 3.
2.4G WIRELESS
CONTROLLER
P2 CONTROLLER
WIRELESS
