PRECAUTIONS AND WARNINGS
Safety use considerations:
1. This lamp shall be used with 12V approved designated adaptor.
2. Do not rub on the plastic enclosure of this lamp
3. This lamp must be protected from mechanical impacts. If damages occurred,
the lamp must be removed from the hazardous area.
WARNING – DO NOT MAKE MODIFICATION ON THE LAMP AND REPLACE PARTS NOT
SPECIFIED FOR ATEXBEAM LAMP.
WARNING – DO NOT CHARGE WITHIN POTENTIALLY EXPLOSIVE ENVIRONMENT
WARNING – AVOID STRONG ALKALINE SUBSTANCES AND SOLUTION.
WARNING – DO NOT DISMANTLE THE LAMP.IN ANY CIRCUMSTANCES. RETURN THE LAMP
TO AUTHORISED SERVICE CENTER.
WARNING – ONLY AUTHORISED PERSONEL IS ALLOWED TO OPEN THE LAMP
WARNING – DO NOT SUBMERGE THE LAMP IN WATER.
WARNING –
–
–
–
ONLY USE SPECIFIED ATEXBEAM CHARGER ADAPTOR AND CHARGING
STATION FOR CHARGING ATEXBEAM LAMP
WARNING ONLY USE MANUFACTURER’S APPORVED BATTERY PACK FOR REPLACEMENT
WARRANTY
When ATEXBEAM lamp PL-AT800 is used under normal conditions and according to
instructions in the user guide, the lamp is under warranty for 3 years period against
manufacturing defect. The warranty period for battery and main lighting LED is 12 months
from date of purchase.
Disclaimer:
The contents of the lamp cannot be altered or changed in any circumstances as this will
void the warranty.
The product is strictly designed for Zone 1, 2, 21, 22.
The built-in battery pack is covered with only 12 months warranty from date of purchase
and manufacturer will not be responsible for replacing the battery pack and the LED module.
11
WARNING DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE IS PRESENT
WARNING DO NOT OPEN WHEN ENERGIZED
ATE
X
BEAM
Содержание PL-AT800
Страница 14: ......
