Atest Gaz Alpa EcoTerm XT, Руководство пользователя

Страница: 11 / 40

www.atestgaz.pl
The indicator lamps presents:
current status of the detector,
stored (historical) events affecting status of the detector, i.e. warning and/or alarms reported by
the detector as well as detector failures.
The detector also makes it possible to adjust intensity of LED indicator light designed to present correct
operation of the detector (see details in Section 7.2).
Table 3 summarizes all signals that indicate the current status of the detector.
Status of indicator LEDs Status of the
detector
operation
Status of
interconnections
check
Meaning
1
Warm-up - Gas detector activation
OK OK The detector works properly, gas
concentration below the determined
thresholds
2
Warning 1 OK Exceeded warning threshold 1
Warning 2 OK Exceeded warning threshold 2
Alarm OK Exceeded alarm threshold
Failure OK Failure – detector damage
OK Failure The detector works properly, gas
concentration below the determined
thresholds
The detector also indicates an interruption
of electric interconnections or incorrect
values of electric current (see details is
Section 8)
2
Warning 1 Failure Exceeded warning threshold 1
The detector also indicates an interruption
of electric interconnections or incorrect
values of electric current (see details is
Section 8)
Warning 2 Failure Exceeded warning threshold 2
The detector also indicates an interruption
of electric interconnections or incorrect
values of electric current (see details is
Section 8)
Alarm Failure Exceeded alarm threshold
The detector also indicates an interruption
of electric interconnections or incorrect
values of electric current (see details is
Section 8)
1 G – green, Y – yellow, R – red.
2 Light intensity switch SW3 in position 2 – LED – Low.
s. 11|26
User Manual: POD-044-ENG R01
R R Y Y R R R R Y Y Y Y
R Y Y R R R Y Y Y Y
R Y Y R Y Y Y Y
Y Y
R R R R R R
R R R R
R R
G G
G
G Y R G Y R
Y Y G G Y Y G G Y Y Y Y
Y Y Y Y Y Y Y Y
G G