TPM QuickSet Installation Guide 2009
- 15 –
10.
CAR SELECTION
I. Car Selection First steps
1.
You are now ready to select your car.
If you do not see this screen, please close the
program and start over.
If there’s already car model shown on the screen
that is not the one you wish to select, please click
the bracket of “Load old set” and then click “reset”
to start over.
By clicking the Selection button (“Select a car” if
no car selected, or the picture of the latest car
that has been selected) you can choose or switch
to a new car.
2.
If you have more than one car (up to 4) for
you and your family, you can still use the
same TPM QuickSet for all your cars! For
each car, you can select a new car model,
and give it a name by clicking the “Type
name” zone, then click ”Select a car” to
continue the car model selection.
Note : you can switch from a car to another by
clicking the car selection button (see step1)
