ATEQ F28+, Быстрый старт

Страница: 37 / 42

.394.00_EN_01 / 2019-02-25
37 / 42
Label Function Description
DUMP OFF Dump off Disable the dump phase in the program
parameters
END OF CYCLE End of cycle Several automatism case depending on fail part
management
EXT. DUMP External dump The test part is vented to atmosphere through an
external valve
FILL MODE Fill types Special filling methods
FILTER Filtering Stabilize the measurement values
FLOW LEVEL Flow level Add a minimum fail parameter
MINI-VALVE Mini valve Access to highest time resolution (fast test) and
auto zero time
NAME Name Program customization
NO NEGATIVE No Negative Replace negative value per 0
N TESTS N TESTS Repeats the test when the results get close to the
reject level
PEAK HOLD Peak hold Give as result, the highest flow during the test
time
PR:SEQUENCE
Sequencing Allowed program automatic sequencing
PRE-FILL Pre-fill types Special filling methods
PRESSURE DROP Pressure drop Pressure drop mode function in the Desensitized
mode
REF. VOLUME Reference volume Adjust the reference volume value with flow
units only
REWORK LIMIT Rework limits Additional levels for specific reworkable parts
Sd Part
SD PART 2
SD PART 3 Sealed part Several optional ways to test sealed parts
SEALED DIFF
Sealed differential Allows testing small parts volume difference
between test and reference volumes
SIGN Sign Return opposite result
STAMPING Stamp Pneumatic or electric output to identify the part
STD CONDITIONS Standard conditions Standard conditions correction with parameters
SYNC. TEST
Synchro test A programmable input allows to pass from
Stabilization to Test phase
T+R TEST Test and reference test Display which part has failed during a test with
two parts
TEMP.CORR. 1 Temperature correction Software temperature test part correction
TEST CHECK Calibration check Calibration check by adding a volume at the end
of test time
UNITS Units Access to International System or American or
Custom Units
VALVE CODES Valve codes Available outputs for external automatism
Others functions are available depending on software version.