- 17 -
Switch Mode Command
You can choose how the VS481
B
behaves when a new input
source is connected to it. By default the Next switch mode setting
is enabled. Use the commands below to select a different mode.
There are three Switch Modes:
Next
- Switch priority is placed on the next port that has a new
source device connected to it. (default)
Default
- The switch behaves normally without automatic
switching.
Auto
- Places priority on a selected port so that when a source is
connected to the said port, the VS481
B
automatically switches to
it, and the port can not be changed until the source is unplugged
or auto switching mode is disabled with the default command.
In addition, the
Go To
function enables the VS481
B
to switch to
the next port with a powered on source device when the current
input source device is powered off.
The formulas for Switch Mode commands are as follows:
1. Switch C Input C Port Control
[Enter]
For example, to enable Auto mode for port 02, type the following:
swmode i02 auto [Enter]
2. Switch C Control [Enter]
For example, to enable Next mode, type the following:
swmode next [Enter]
3. Switch C Control [Enter]
For example, to enable Default mode to disable Next/Auto mode,
type the following:
swmode default [Enter]
4. Switch C Control [Enter]
For example, to enable the Go To function, type the following:
swmode goto on [Enter]
