ATEN VS0108HA, Руководство пользователя

Страница: 16 / 20

- 16 -
EDID Commands
You can set up which EDID mode the VS0108HA uses, select
one of the 14 available ATEN default EDID configurations, and
copy the EDID of any connected display to the input source with
the following command:
EDID C Control [Enter]
The following tables show the possible values and formats for the
Control command:
Note: For the port and default command strings, the yy variable
must be entered for the command to work.
The following table shows the available command list:
For more information on ATEN default EDID configuration, see
ATEN Default EDID , page 19.
Command Description
edid Enable EDID selection
Control Description
portyy Implement the EDID of the connected
display to Port yy, and pass it to the
video source
(Note: yy: 01-08)
auto Implement the EDID of all connected
displays. The VS0108HA uses the
best resolution for all displays
defaultyy Implements the specified ATEN
default EDID configuration
(Note: yy: 00-13, default is 00)
Command Control Enter Description
edid portyy [Enter] The EDID from Port yy is passed to
the video source (yy: 01-08)
edid auto [Enter] The VS0108HA implements the EDID
of all connected displays and uses
the best resolution for all displays
(default)
edid defaultyy [Enter] ATEN’s default EDIDyy is passed to
the video source (yy: 00-13, default is
00)