ATEN VS-102, Руководство пользователя

Страница: 9 / 13

- 9 -
Installation
Installation of the VS102 is simply a matter of plugging in the
appropriate cables.
To install the splitter, refer to the installation diagram on page 10
as you perform the following steps:
1. Use a VGA cable to connect the computer's video port to the
VIDEO IN port of the VS102.
2. Use the video displays VGA cables to connect to the VIDEO
OUT 1 and 2 ports of the VS102.
3. Plug the Power Adapter into an AC source; plug the Power
Adapter cable into the DC IN socket on the VS102's side
panel.
4. Power on the VS102.
Note: Use a DC 9V adapter with polarities only.
1. Make sure that the power to all devices you will be
installing has been turned off.
2. Make sure that all devices you will be installing are
properly grounded.