ATEN VE849, Руководство пользователя

Страница: 15 / 32

7
Chapter 2
Hardware Setup
To install the VE849 Multicast HDMI Wireless Extender, refer to the
installation diagrams below as you preform the following steps:
VE849T - Transmitter Installation
1. Use an HDMI cable to connect the HDMI source device(s) to the HDMI
input port(s) on the rear of the VE849T.
2. Use an HDMI cable to connect the local HDMI video display (HDTV) to
the HDMI output port on the rear of the VE849T.
3. Plug the provided power adapter into an appropriate power source; plug
the power adapter cable into the power jack on the VE849T.
4. Connect the IR Blaster cable included with your package into the IR
Blaster port (see IR Cable Installation , page 8). (Optional)
1. Important safety information regarding the placement of this
device is provided on page 18. Please review it before
proceeding.
2. Make sure that the power to all devices connected to the
installation are turned off.
1
2
3
4