Chapter 4 OSD Operation
14
Pairing Transmitter to Receiver
If the transmitter and receiver cannot find each other or lose their connection,
follow the steps on page 16 for pairing additional transmitters to re-establish
the connection.
Switching between Wireless HDMI Transmitters
1. Press the
Transmitter No. button
. The OSD will show a list of
transmitters linked to the receiver.
Use the
Up / Down
buttons to select the transmitter you want to display on your
HDTV / HD projector. Then press
OK
and allow 10-12 seconds for the receiver
and transmitter to re-establish a connection.
Remove Transmitter
This section shows the OSD with the option of removing Transmitters that are
paired to the receiver.
1. On the remote control, press the
Transmitter No.
button to display the list
of linked transmitters.
2. Select the
SETUP
menu by using the
UP / Down
buttons, then press
OK
.
