Chapter 2. Hardware Setup
10
Connecting the VE814A Unit
Follow the steps below to connect the VE814A to a source and other devices as
required.
1. Use an HDMI cable to connect the HDMI Out port on your source device to
the HDMI In port on the VE814AT.
2. Use an RJ-45 cable to connect the HDBaseT Out port on the VE814AT to
the HDBaseT In port on the VE814AR.
3. Depending on your preferred location of display, connect a display device
to the VE814AT or VE814AR using an HDMI cable.
Note:
When displays are connected to the VE814A transmitter and
VE814A receiver, the VE814A system adopts the EDID values of the
display connected to the transmitter’s side.
4. Plug the Power Adapter Cables into the Power Jack on the VE814AT and
VE814AR.
5. (Optional) To send RS-232 serial commands, connect a computer or
control system to the RS-232 Port on the VE814AT or VE814AR.
Serial Device
HDMI Source
Device
VE814AR
VE814AT
RS-232 to
Serial Device
4
4
2
7
1
6
5
5
6
7
3a
3b
3b
HDMI Display
HDMI Display
HDMI Display
IR
IR
Internet/
LAN
