Chapter 1. Introduction
5
Components
VE813AT (Transmitter) Front and Rear View
No.
Component
Description
1
LEDs
The VE813AT has four LEDs to indicate operating
status – Power, Link, USB, and Video.
2
Unit to Unit Port
The Cat 5e cable that connects the Transmitter and
Receiver plugs in here.
3
Firmware Upgrade
Port
The Firmware Upgrade Port is reserved for technical
support. If you would like to upgrade the unit’s
firmware yourself, please contact your ATEN dealer.
4
HDMI In Port
Connect an HDMI cable from the source device into
this port.
5
USB Type B Input
The USB cable from your computer or USB controller
device plugs in here.
6
Power Jack
The cable from the Power adapter connects here.
Front View
Rear View
1
2
3
4
5
6
