7
Chapter 2
Hardware Setup
To install the VE809 HDMI Wireless Extender, refer to the installation
diagrams below as you preform the following steps:
VE809T - Transmitter Installation
1. Use an HDMI cable to connect the HDMI source device(s) to the HDMI
input port(s) on the rear of the VE809T.
2. Use an HDMI cable to connect the local HDMI video display (HDTV) to
the HDMI output port on the rear of the VE809T.
3. Plug the provided power adapter into an appropriate power source; plug
the power adapter cable into the power jack on the VE809T.
4. Connect the IR Blaster cable included with your package into the IR Out
, page 8). (Optional)
1. Important safety information regarding the placement of this
device is provided on page 14. Please review it before
proceeding.
2. Make sure that the power to all devices connected to the
installation are turned off.
1
2
3
4
