VE3912T User Manual
9
2. Connect the HDMI Output Port on the VE3912T to an HDMI-enabled
display.
3. Connect an Ethernet cable to the HDBaseT Output port on the transmitter,
and connect the other end to the HDBaseT input port on the receiver for
transmission and power supply.
Note:
This HDBaseT output port is PoH PD ready, therefore you can
connect the PoH PSE ready device such as VP1421 for power
delivery, and there is no need to plug power adapter to the VE3912T.
4. (Optional) Connect your computer or a control system to the terminal block
on the VE3912T. The RS-232 Serial Port supports Command Mode and
Bypass Mode, see
To control the VE2812R using an ATEN Control System/Control Pad,
connect a Control Box/Control Pad to the VE3912T’s RS-232 Serial
port and then put the RS-232 Serial Communication Switch to
Command
.
Note:
By default, the VE3912T is set to
Command
mode.
To bypass RS-232 serial control signals to a PC or a serial device,
connect the PC or serial device (e.g. touch pad) to the VE3912T’s RS-
232 Serial port and put the RS-232 Serial Communication Switch to
Bypass.
5. (Optional) To receive IR signals to remotely control a device (e.g. blu-ray
disc) connected to the video receiver, connect an IR emitter to the
VE3912T’s IR Port and an IR receiver to the VE2812R’s IR Port or vice
versa.
Note:
To purchase an IR emitter and an IR remote control, contact your
local sales representative for more information.
6. (Optional) Plug the power adapter cable into the Power Jack for additional
power supply.
Note:
The VE3912T prioritizes the power supply from the power adapter
when the Power Adapter is plugged in.
