ATEN VE2812PR Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 39

ATEN VE2812PR Скачать руководство пользователя страница 9

VE2812R / VE2812PR User Manual

ix

About this Manual

This user manual is provided to help you get the most from the VE2812R /
VE2812PR unit. It covers all aspects of installation, configuration, and
operation. An overview of the information found in the manual is provided
below.

Chapter 1, Introduction

introduces you to the VE2812R / VE2812PR. Its

purpose, features, installation considerations, and panel components are
presented and described.

Ch apter 2, Hardware Setup

describes the steps that are necessary to

quickly and safely set up your installation.

Chapter 3, Operation

explains the limitations, and how to adjust audio

channel using the a switch and RS-232 commands.

provides a list of safety instructions and precautions, contact

information for ATEN technical support, product specifications, and other
technical information.

Note:



Read this manual thoroughly and follow the installation and operation
procedures carefully to prevent any damage to the unit or any connected
devices.



The product may be updated, with features and functions added, improved
or removed since the release of this manual. For an up-to-date user
manual, visit

http://www.aten.com/global/en/

«
...
7
8
9
10
11
...
»

Содержание VE2812PR








































Отзывы:

Нет отзывов