ATEN VC1080, Руководство пользователя

Страница: 18 / 38

VC1080 User Manual
10
Installation
Installation of the VC1080 is simply a matter of plugging in the appropriate
cables.
To install the VC1080, refer to the installation diagram below as you perform
the following steps:
1. Use an HDMI cable to connect the HDMI input port on the video display
device to the HDMI Out port on the rear of the VC1080.
2. Connect the source device(s) as follows:
a) Use RCA cables to connect the component source device(s) to the
Comp1 In or Comp2 In ports on the VC1080.
b) Use RCA cables to connect the composite source device(s) to the A/V1
In or A/V2 In ports on the VC1080.
c) Use an S-video cable to connect the S-video source device(s) to the S-
Video In port on the VC1080.
d) Use an HDB-15 cable and audio cable to connect the VGA source
device(s) to the VGA In port on the VC1080.
e) Use HDMI cables to connect the HDMI output ports on the source
device(s) to the HDMI In port on the VC1080.
3. Plug the provided power adapter into an appropriate AC power source;
plug the power adapter cable into the Power Jack on the VC1080.
4. Connect your audio devices (such as speakers or AVRs) to the Stereo
Audio Ports or Digital Audio Ports.
5. (Optional) To edit the VC1080 system settings through the RS-232 port,
connect the hardware / software controller here.