UH3238 User Manual
12
If the following conditions occur, unplug the device from the wall outlet
and bring it to qualified service personnel for repair.
The power cord or plug has become damaged or frayed.
Liquid has been spilled into the device.
The device has been exposed to rain or water.
The device has been dropped, or the cabinet has been damaged.
The device exhibits a distinct change in performance, indicating a need
for service.
The device does not operate normally when the operating instructions
are followed.
Only adjust those controls that are covered in the operating instructions.
Improper adjustment of other controls may result in damage that will
require extensive work by a qualified technician to repair.
Cables
Cables and connectors that connect cables are designed and manufactured
for the purpose of combining electrical and electrical signals. Therefore,
we do not design or manufacture on the premise that external force is
applied.
Do not energize the cable and connector with force applied. Do not apply
excessive external force as it may cause damage and cause a malfunction
or accident.
Do not use the cable or connector as a structure such as the housing of
KVM or other equipment to be connected (KVM body is not fixed, and the
connector is used to prevent movement or replace the fixing bracket) or as
a part of it. Please give me.
When wiring, make sure that you have enough room to bend it so that it
can be handled. Extreme bending or pulling the cable in two directions can
damage the connector.
Do not install cables or connected connectors in a corrosive substance,
corrosive gas (ammonia, sulfur, etc.), hot and humid environment, or in
direct sunlight. It may cause malfunctions such as performance
deterioration due to damage or corrosion.