ATEN UH3232, Руководство пользователя, Страница: 9 / 13

- 9 -
Installation
Hardware
To setup the UH3232, use the diagram on the next page (the
numbers in the diagram correspond with the numbered
instructions below), and do the following:
1. Connect the UH3232's USB-C cable to a USB-C enabled
computer.
2. Plug an Ethernet cable to the Gigabit LAN port.
3. Use a USB cable to connect a USB 3.0/2.0/1.1 peripheral
device to the USB 3.1 Gen 1 port.
4. Connect an HDMI or VGA monitor* to its respective port on
the UH3232.
Note: Only connect one monitor at time to the UH3232. If you
connect both a VGA and HDMI monitor to the UH3232,
the HDMI port will have priority to display video.
1. Make sure that the power to any device that you
connect to the installation has been turned off.
2. Make sure that all devices you will be installing are
properly grounded.