Uninstalling the Driver
If you should ever need to uninstall the driver files, simply do the following:
1. Put the driver disk in the disk drive.
2. Open Windows Explorer and navigate down the driver disk to the
folder that you installed the driver files from (the Win98 folder).
3. Click unistall.exe.
Hardware Installation
Refer to the example diagrams on the next page as you follow these step
by step instructions:
1. Boot up your notebook.
2. Plug the cables from your peripherals into the appropriate ports on
the UC-2000 / UC-2000L.
3. Plug the B Connector end of the USB cable (supplied with this
package) into the USB Type B (Upstream) Port; plug the A
Connector end of the USB cable into the notebook’s USB port.
4. Windows will recognize the UC-2000 / UC-2000L and install the
necessary USB hardware drivers to handle the attached peripherals.
5. When Windows is done, and you have rebooted, you can use all the
attached peripherals with your notebook.
- 7-
2001-06-08