ATEN OL1000LV, Руководство пользователя

Страница: 57 / 68

47
Appendix
Safety Instructions
Transportation
 Please only transport the UPS system in the original package for shock and
impact protection.
Preparation
 Condensation may occur if the UPS system is moved directly from cold to
warm environment. The UPS system must be absolutely dry before being
installed. Please allow at least two hours for the UPS system to acclimate
the environment.
 Do not install the UPS system near water or in moist environment.
 Do not install the UPS system in direct sunlight exposure or near heating
sources.
 Do not block ventilation holes in the UPS housing.
Installation
 Do not connect appliances or devices which would overload the UPS
system (e.g. laser printers) to the UPS output sockets.
 Place cables in such a way that no one can step on or trip over them.
 Do not connect domestic appliances such as hair dryers to UPS output
sockets.
 The UPS can be operated by any individuals with no previous experience.
 Connect the UPS system only to an earthed shockproof outlet which must
be easily accessible and close to the UPS system.
 Please use only VDE-tested, CE-marked (or UL-marked for 120 VAC
models) mains cable (e.g. the mains cable of your computer) to connect
the UPS system to the building wiring outlet (shockproof outlet).
 Please use only VDE-tested, CE-marked (or UL-marked for 120 VAC
models) power cables to connect the loads to the UPS system.
 When installing the equipment, it should ensure that the sum of the
leakage current of the UPS and the connected devices does not exceed
3.5mA.