Operation
There are two ways to access any computer on the installation: by pressing the front panel
SELECT BUTTON
, or by
entering
Hot Keys
from the keyboard. Once a computer has been accessed, the CPU Switch directs keyboard control, mouse
control, and video image of that computer to you as if the computer were right next to you.
Front Panel Button Selection
To select a computer with this method, simply press the front panel
SELECT BUTTON
of the CPU Switch it connects to
several times. When it is selected, the corresponding LED turns on to indicate so.
For a two stage installation, you have to select with both CPU Switches; for a three stage installation, you have to select
with all three CPU Switches.
The
SELECT LED
turns on when the
SELECT BUTTON
is pressed.
Hot Key Selection
Hot Keys are entered by pressing and releasing
Alt
,
Ctrl
, and
Shift
keys simultaneously, followed by the command key(s),
and end with pressing the
Enter
key.
1.
Scan Mode:
Scan Mode automatically scans powered on computers one-by-one from the first computer of the first stage to the last
computer of the last stage. To start Scan mode, enter this combination:
[Alt+Ctrl+Shift]+0+[Enter]
To end Scan Mode, press:
Space
2.
Previous/Next Mode:
Previous/Next Mode selects powered on computers manually one-by-one from the first computer of the first stage to the
last computer of the last stage. To start Previous/Next mode, enter this combination:
[Alt+Ctrl+Shift]+9+[Enter]
To select the previous port, press:
LeftShift
To select the next port, press:
RightShift
To end Previous/Next Mode, press:
Space
3.
Direct Port Selection:
With Direct Port Selection you can access any powered on computer on the installation directly. To directly select a first
stage port, enter this combination:
[Alt
+Ctrl+Shift]+#+[
Enter]
Where
#
represents the port number that the computer you wish to access is attached to.
Содержание Master View CS-102
Страница 11: ......
