ATEN KE6900, Руководство пользователя

Страница: 119 / 324

Chapter 2. Hardware Setup
101
LED Display
Both the Transmitter and Receiver have front panel LEDs to indicate their
operating and power status, as explained in the table below:
Authentication Lock (KE6910 / KE6912 only)
The KE6910/KE6912 extenders feature the Authentication Lock function.
When accidental power cut happens, the function allows the user to retain his/
her settings as was shown before the power cut. The user keeps the same
authentication and display.
This function can be configured in General on page 199.
LED Indication
LAN This LED indicates the network status.
Š
Lights when connected to the LAN and blinks when the Ethernet
connection is active:
Š
Orange: 10 Mbps
Š
Green: 100 Mbps
Š
Green: 1000 Mbps
Š
Off when not connected to the LAN.
Power
Š
Lights blue when the unit is powered on.
Š
OFF when power is off.
Local
Š
Lights green to Indicate the Transmitter has KVM focus of the
computer
Remote
Š
Lights green to Indicate the Receiver has KVM focus of the
computer.