ATEN IC-485AI, Руководство пользователя

Страница: 15 / 24

- 15 -
Simplex
A Simplex configuration is one in which more than two devices
are linked for communication using several IC-485AI units in a
manner similar to Multidrop. The difference is that in a Simplex
configuration, the Primary device can only talk, and the
Secondary devices can only listen.

Simplex uses reverse two wire cabling to link all the
connected IC-485AI units, as shown in the figure below:

For all IC-485AI units, set the unit to DCE or DTE depending
on what type of device the IC-485AI will plug into (if it will plug
into a DCE device, configure it for DTE, and vice versa).

For all of the units (Primary and Secondary), set SW7 ON ; set
SW8 ON .
Note: No more than 31 Secondary units can be connected.
Primary
T+
T -
R -
R+
Secondary 1
R+
R -
T -
T+
Secondary 2
R+
R -
T -
T+
Secondary 3
R+
R -
T -
T+
:
:
Secondary 31
PC1
COM1/
COM2 PC2
COM1/
COM2
PC3
COM1/
COM2
PC4
COM1/
COM2