>Temperature Sensors
05
The GN0116 includes two sets of temperature sensors.
Each set contains two sensors.
The included temperature sensors are of the Analog
Input type so they can be connected to ports 1 & 2 and
3 & 4.
>Smoke Detector / Beeper / Reed Switch
Apart from the bundled sensors, with the appropriate
cabling the GN0116 can also support a wide variety of
sensors available on the market.
For this demonstration, three sensor/alert devices
were chosen: Smoke Detector, Beeper and Reed
Switch.
Smoke Detector
Beeper
Reed Switch
As the sensors are connected to the GN01167 via a
RJ-45 port, a UTP cable with the RJ-45 connector is
needed to connect the sensors.
To make the connection, strip the UTP wiring then
connect each wire to their respective sensor. Please
see the attached wire/PIN reference table for details.
Once the three sensor/alarm devices have been
connected to the UTP cable, insert the RJ-45 connector
to the 201/202 Digital Input ports.
GN0116 Guardian Over the NET™
Installation Guide