ATEN ES0152, Руководство пользователя, Страница: 288 / 300

ES0152 / ES0152P CLI User Manual
276
ip ssh
Use the ip ssh global
configuration com
-
mand to \
enable the
SSH. Use the no form
of this \
command to
disable the SSH.
15
GLOBAL
_CONFIG
show network-clock Show selector state. 0 EXEC
clear network-clock clk-source <range_list>
Clear active WTR
timer.
15 EXEC
network-clock clk-source <range_list>
nominate { clk-in | {interface <port_
-
type_id>} }
Nominate a clk input to
become a selectable
clock source.
15
GLOBAL
_CONFIG
no network-clock clk-source <range_list>
nominate
15
GLOBAL
_CONFIG
network-clock input-source { 1544khz |
2048khz | 10mhz } Sets the station clock
input frequency
15
GLOBAL
_CONFIG
no network-clock input-source 15
GLOBAL
_CONFIG
network-clock output-source { 1544khz |
2048khz | 10mhz } Sets the station clock
output frequency
15
GLOBAL
_CONFIG
no network-clock output-source 15
GLOBAL
_CONFIG
network-clock clk-source <range_list>
aneg-mode { master | slave | forced} Sets the preferred
negotiation.
15
GLOBAL
_CONFIG
no network-clock clk-source <range_list>
aneg-mode
15
GLOBAL
_CONFIG
network-clock clk-source <range_list> hold-
timeout <3-18>
The hold off timer
value in 100 ms.Valid
values are range 3-18.
15
GLOBAL
_CONFIG
no network-clock clk-source <range_list>
hold-timeout
15
GLOBAL
_CONFIG
network-clock selector { { manual clk-
source <uint> } | selected | nonrevertive |
revertive | holdover | freerun } Selection mode of
nominated clock
sources
15
GLOBAL
_CONFIG
no network-clock selector 15
GLOBAL
_CONFIG
network-clock clk-source <range_list> pri
-
ority <0-1>
Priority of nominated
clock sources.
15
GLOBAL
_CONFIG
COMMAND DESCRIPTION P M