ATEN CS1964, Руководство пользователя, Страница: 35 / 56

Chapter 4. Hotkey Operation
27
Buzzer Control
The buzzer can be turned on or off. To turn the buzzer on/off, do the following:
1. Invoke HSM (see page 24
).
2. Press and release [B].
Hotkey Port Switching
To enable/disable hotkey port switching, do the
following:
1. Invoke HSM (see page 24).
2. Press [X] [Enter] .
When disabled, port switching hotkeys [Scroll Lock] [Scroll Lock] (and the
alternative [Ctrl] [Ctrl]) will not work.
Firmware Upgrade Mode
To enter Firmware Upgrade Mode, do the following:
1. Invoke HSM (see page 24).
2. Key in: upgrade
3. Press [Enter] .
The front panel LEDs flash to indicate Firmware Upgrade Mode is in
effect.
Note: To exit Firmware Upgrade Mode, you must power off the switch.
Restore Default Settings
To reset the CS1964 to its default Hotkey settings, do the following:
1. Invoke HSM (see page 24).
2. Press [R] [Enter] .
All Hotkey settings return to the factory default settings.