ATEN CL-1758L, Руководство пользователя

Страница: 77 / 84

63
5. Slide the switch open and closed a couple of times to be sure that it is
properly aligned and operating smoothly. (See Opening the Console ,
page 17, and Closing the Console , page 18, for opening and closing
procedures.)
6. After determining that the switch is properly lined up and operating
correctly, finish up by fully tightening down the partially tightened front
attachment screws inserted in step 3.
Dedicated Invocation Keys
Two dedicated keys are provided on the keyboard module to make it easy to
invoke the OSD and Hotkey Mode, as shown in the diagram, below:
Note: These keys are toggles. Press once to invoke the feature, press again to
exit.
cl1758.book Page 63 Thursday, March 30, 2006 3:30 PM