ATEN CE624, Руководство пользователя

Страница: 15 / 37

Chapter 1. Introduction
7
CE624R (Remote Unit) Front and Rear View
No. Component Description
1 DVI-D output ports Connect a DVI monitor to each of these DVI ports.
2 wakeup PC
pushbutton Press this button if you are at the remote console’s
location and you want to wake the computer on the
local side.
3 Video out 1 & 2 LEDs Indicates the video output activity and status between
the units, see page 21 for more information.
4 link LED Indicates the transmission from remote and local units
is stable, see page 21 for more information.
5 power LED Indicates the unit is receiving power, see page 21 for
more information.
6 grounding terminal Grounds the unit to prevent damages from power
surges or static electricity.
7 power jack The cable from the power adapter connects here.
8 RS-232 serial port This RS-232 serial port is for connecting to a serial
terminal for configuration.
9 USB Type-A ports Plug the remote console’s keyboard and mouse or
your USB 2.0 devices into these three USB ports.
10 audio ports These mini stereo ports are for the speakers (green)
and microphone (pink).
11 HDBaseT input port The Cat 5e/6/6a cable that connects the local and
remote units plugs in here.
12 long reach mode
switch Put the switch to ON to enable the long reach mode,
see
Long Reach Mode , page 21.
2 3 1
7 8
9
10
CE624R (Remote Unit) Front View
CE624R (Remote Unit) Rear View
4 5
6 11 12 13