21
Chapter 3
Operation
Overview
The
Operation
chapter describes how the LED display lights work and how to
use HDBaseT Long Reach Mode.
LED Display
The CE624
/
CE924 local and remote units have front panel LEDs to indicate
their operating status, as shown in the tables, following:
Long Reach Mode
The long reach mode switch on the rear panel of the CE624
/
CE924 provides
long-reach connectivity – up to 150 m – with resolutions up to 1080p single
view or 720p dual view. To use this feature, on the rear of the local or remote
unit, set either one of the long reach switch to
ON
.
Note:
The unit used in the diagram below is CE924, the procedure for
connecting the CE624 is identical.
LED
Indication
Power
Lights (green) steadily to indicate that the unit is receiving power.
Link
Lights (orange) to indicate that the connection at the Local and
Remote units are OK.
OFF when there is a problem with the connection.
Flashing (orange) indicates the HDBaseT transmission signal is
unstable.
Video Out 1/2
(CE624R /
CE924R only)
Flashes (orange) to indicate normal video output without HDCP.
Static (orange) light indicates normal video output with HDCP.
OFF indicates that there is no video activity.
