CE611 User Manual
8
Note:
Do not omit this step. Proper grounding helps prevent damage to the
unit from surges or static electricity.
2. Connect the CE611L’s Audio In and Audio Out port to a local computer
using a microphone and a speaker cable.
3. Connect the CE611L’s USB Type-B port to the local computer’s USB
Type-A port using a USB cable.
4. Connect the CE611L’s DVI In port to the local computer.
5. Connect the CE611L’s HDBaseT Out port to the CE611R’s HDBaseT In
port using a Cat 5e, Cat 6 or ATEN 2L-2910 cable depending on your
video resolution.
Note:
Use a Cat 5e cable to display a video of 1080p @60Hz up to 100 m.
Use a Cat 6 or ATEN 2L-2910 cable to display video of 1920 x 1200 /
1600 x 1200 @ 60Hz up to 100 m.
6. Plug one of the supplied power adapters into a power source, and then
plug the power cable into the CE611L’s Power Jack.
7. Connect a DVI-enabled monitor to the CE611R’s DVI Out port using a
DVI cable.
8. Plug USB devices (mouse, keyboard, etc.) into the USB ports on the
CE611R.
9. Plug speakers and a microphone into their respective audio ports on the
CE611R.
10. Plug the second power adapter into a power source, and then plug the
power cable into the CE611R’s Power Jack.
11. To remotely control the computer via RS-232 serial commands, connect
the computer’s serial port to the CE611L’s RS-232 Serial port via a serial
cable, and then connect a hardware controller or a PC (installed with a
software controller) to the CE611R’s RS-232 port.
Rack Mounting
The CE611 can be mounted on system racks using VE-RMK1U Rack Mount
Kit. For detailed setup instruction, see
VE-RMK1U Installation Guide
.
