ATEN CE-300, Руководство пользователя, Страница: 23 / 34

13
Chapter 4
The Firmware Upgrade Utility
The Windows-based Firmware Upgrade Utility (FWUpgrade.exe) provides a
smooth, automated process for upgrading the KVM switch's firmware.
The Utility comes as part of a Firmware Upgrade Package that is specific for
each device. New firmware upgrade packages are posted on our web site as
new firmware revisions become available. Check the web site regularly to find
the latest packages and information relating to them:
http://www.aten.com
Before You Begin
To prepare for the firmware upgrade, do the following:
1. From a computer that is not part of your KVM installation go to our Inter-
net support site and choose the model name that relates to your device
(CE-300) to get a list of available Firmware Upgrade Packages.
2. Choose the Firmware Upgrade Package you want to install (usually the
most recent), and download it to your computer.
3. Shut down the computers on your CE-300 installation.
4. Turn the power of the Remote unit on. Connect the Cat 5 cable from the
Remote Unit to the Local Unit.
5. Press and hold the select button. Then turn the power for the Local unit on.
6. Wait until both front panel green LEDs on the Local unit are flashing on
and off to release the select button.
7. Check to see if the orange LED on the front panel of the Remote unit is on
to indicate that Firmware Upgrade Mode is in effect. (If the LED is
blinking or not on, the unit is not ready to upgrade the firmware. You must
repeat steps 5 and 6 again.)
(Continues on next page.)
ce300-v3.book Page 13 Wednesday, June 21, 2006 2:45 PM