ATEN ALTUSEN PE6108, Руководство пользователя

Страница: 25 / 88

Chapter 1. Introduction
13
PE6108A / PE6208A / PE8108A / PE8208A Readout Section
No. Item Description
1 Circuit Breaker
Pushbutton
As a safety measure, if there is an overcurrent situation regarding the
device’s power, the circuit breakers will trip. Press the button to
recover normal operation.
2 Power Sockets
8 x NEMA 5-15R or 8 x NEMA 5-20R
Note: Holes for ATEN Lok-U-Plug cable holders are located around
the sockets. See Securing the Cables , page 19, for further
information.
3 Readout Section

The selection (PDU Current / Outlet Current / IP Address) appears
in the first (1-digit) display window.

PDU Current / Outlet Current / IP Address appear in the second
(3-digit) display window

The LEDs above the items indicate which one the readout relates
to.

Press the button next to the first display window to cycle the
selection among the items.
4 Power LED
The LED lights when the eco PDU is ready to operate.
5 LAN Port and
LEDs The cable that connects the eco PDU to the LAN plugs in here. The
Link and LAN LEDs are built into the LAN port:
Link : Lights GREEN to indicate that a connection via the eco PDU's
RJ-45 Ethernet port has been established. Flashes to indicate data is
being transmitted.
LAN : Lights ORANGE to indicate 10 Mbps data transmission speed.
The LED lights GREEN to indicate 100 Mbps data transmission
speed.
6 Reset Switch
This switch is recessed and must be pushed with a thin object, such
as the end of a paper clip.

Press and release to reboot the device.

Press and hold for more that three seconds to reset the eco
PDU to its factory default settings
7
Grounding Terminal The wire used to ground the unit connects here.
8 Sensor Ports External sensors plug into these two RJ-11 ports.
9 Power Socket
The power cord that connects the unit to an AC power source plugs
in here.
3
S E L E C T
PDU
CURRENT
OUTLET
CURRENT
IP
ADDRESS
SENSOR
1
SENSOR
2
OUTLET STATUS