WARRANTY
36
MONTH
For more information, please visit: www.atempower.com
ATEM POWER
(“Manufacturer”) warrants, to the original purchaser, (“User”) that its lithium iron phosphate
(“Battery(ies)”), if purchased from Manufacturer or an authorized distributor or dealer, and used in a deep-cycle
application, will be free of defects in material and/or workmanship from the date sold and for the duration (the “Warranty
Period”) of 3 YEARS. Within the Warranty Period, subject to the exclusions listed below, the Manufacturer will replace
or repair, if serviceable, the battery and/or parts of the battery, if the components in question are determined to be
defective in material or workmanship. If the Manufacturer deems the battery and/or components to be not repairable,
a new, similar battery will be offered. This Limited Warranty is to the original purchaser of the battery and is not
transferable to any other person or entity.
EXCLUSIONS:
This warranty does not cover defects that are caused by normal wear and tear, inadequate maintenance,insufficient
ventilation, transportation, storage or faulty repair, misuse, neglect, accident or abuse, modification to the battery,
failure to observe operating instructions and parameters or improper installation. The user must follow
recommendations for series and parallel installations, and it is recommended that the installation of the batteries must
be performed by suitably qualified technicians or the warranty will be voided. For further clarity, this warranty is also
void if the battery:
is used as a primary or backup power source for life support systems or other medical equipment, or any use where
product failure could lead to injury to persons or loss of life or catastrophic property damage,
operates (charge or discharge) below or above its authorized temperature range,
is used for applications other than which it was designed and intended for,
is not maintained in accordance with the parameters as set forth in the user manual,
is not paired with a suitable charger,
is subjected to excess vibration as might be caused by out of balance or improperly operated pads in floor
burnishing machines,
manufacturing date codes, safety certification numbers or serial and tracking numbers are destroyed or altered,
is disassembled, altered, or repaired by someone other than an authorized Manufacturer's agent,
has been subject to misuse, abuse or physical damage, or has been modified, altered or operated with other
components not approved by ATEM POWER,
has been damaged by force majeure (e.g. flash of lightning, overvoltage, storm, fire),
selected by the user is not of the correct size, design, and capacity for the intended application,
is damaged due to improper installation; loose connections, under-sized cabling, incorrect connections(series and
parallel) for desired voltage and AH requirements, or reverse polarity connections,inappropriate storage conditions
as defined by the Manufacturer; exposure to extreme hot or cold temperatures, fire or freezing, or water damage
including submersion,
is damaged by external influences while in the user's possession, including unusual physical or electrical stress
such as power surges, uncontrolled voltages and currents, lightning, flood, fire, exposure to excessive hot or cold
temperatures, or accidents.
CLAIMS:
Request return authorization. No returns will be credited without an authorization. In the case of returned products, the
batteries must be packed with enough padding and in the appropriate cartons to eliminate the risk of damage in transit.
Manufacturer's exclusive liability for breach of any warranty on the battery shall be to replace the battery within the
warranty period in accordance with the terms of this limited warranty. In no event shall Manufacturer be liable for any
loss or damages of any other kind,whether direct, incidental, consequential including lost profits, exemplary,special or
otherwise, including any lost profits or removal, shipping, or installation expenses.
