Atel IWE1200A-G, Руководство пользователя

Страница: 25 / 87

RADIUS server.
2.4.7. Configuring RADIUS Settings
The RADIUS client on the WLAN hotspot access gateway works in conjunction with the Web redi-
rection component and IEEE 802.1x component for wireless user authentication. The Web redirection
and IEEE 802.1x components are responsible for acquiring user credential information, and the RA-
DIUS client communicates with a back end RADIUS server using the user credential information.
Go to the Authentication, RADIUS section, and then configure the RADIUS settings. You have to
configure at least Authentication method , Primary RADIUS server , Shared key , and Identifier of
this NAS settings . And leave other settings to their default values. Click Save & Restart when fin-
ished.
Fig. 15. RADIUS settings.
NOTE:
When configured for EAP authentication, the RADIUS server supports either EAP-TLS or
EAP-MD5, but not both at the same time. As a result, not all combinations of EAP-MD5, EAP-TLS,
PAP and CHAP authentication methods are available if both IEEE 802.1x and Web redirection are
enabled. The following table shows the allowable IEEE 802.1x and Web redirection authentication
modes on the
Wireless Advanced edition of access gateway.
Table 1. Allowable authentication modes.
IEEE 802.1x
disabled
IEEE 802.1x
EAP-MD5
IEEE 802.1x
EAP-TLS
Web redirection
disabled
Web redirection
EAP-MD5
Web redirection
PAP
Web redirection
CHAP
18