ATEK MAKINA KONIG NEWLINE Series, Инструкция пользователя

Страница: 8 / 18

8
PROBLEMS
– CAUSES - REMEDIES
PROBLEMS CAUSES REMEDIES
The flansh does not rotate in any
direction. 1.The mains connection is not plugged in.
2.The plug is not correctly wired.
3.The mains tension is not suitable for the
machine
4.The mains switch is not on.
5.Faulty fuse. 1,2,3.Check the correct insertion of the
plug and its connections.
4.Switch on the mains.
5.Replace the fuse.
The pressure of the hydraulic unit is
not enough.
1.The rotation of the hydraulic engine is reverse.
2.There is leak of oil in the connections.
3.There is lack of oil in the hydraulic engine. 1.Reverse the two wires in the connection
plug.
2.Check the couplings change them if
necessary.
3.Put some oil till the level to the hyraulic
engine.
CLAUSE 7
CLAUSE 8
RIM REPAIR EQUIPMENT
Portable thrusting group
Lower thrusting group
Slidable and Turnable
Type Lathe